Skip Navigation Website Accessibility
FOLLOW CATHY SEW & VAC AT...
FOLLOW HONEY RUN QUILTERS AT...

Sewing Machine Service


We service and repair most brands of sewing machines including Janome, Babylock, Juki, Brother, Husqvarna Viking, Bernina, Necchi, Singer, Kenmore, White, Elna and Riccar, both old and new.  From a simple repair to a full gear job and maintenance in between, we have been factory trained to serve all your seiwng needs.

Basic Machine Full Service Tune-Up $120
   
Premium and Computerized Machine     
Full Service Tune-Up
$160
   
Serger Full Service Tune-Up $160
   
Long Arm Full Service Tune-Up $200
   
Industrial Sewing Machine
Full Service and Tune-Up
$200
   
Machine with Embroidery Arm
Multi-Needle Embroidery Machine
Full Service Tune-Up
$210


Our service includes but is not limited to:


Adjustment Checks:
  • Needle bar height
  • Hook timing
  • Feed timing
  • Belt tension
  • Motor speed

Cleaning:
  • Complete blowout
  • Bobbin case cleaning tension spring cleaning
  • Sewing head brush out
  • Motor blow out


Oiling:
  • Primary drive shaft bearings are oiled
  • All moving sections of the shuttle assembly and sewing head are oiled through
  • Proper grease for gears is applied after cleaning the gear teeth properly
Tension Balance:
  • The upper tension is set to the bobbin tension so that the factory setting can be applied by the customer and the stitch is properly balanced on both sides so the stitch is properly locked
  • Obstructions to proper stitch creation is checked, burrs, pressure foot damage, or needle plate damage
  • Pressure bar pressure is set to create the proper stitch
Test sew out:
  • Primary stitch functions are tested with multiple needle positions in at least three stitch tests
  • The feed functions are also tested in several length settings and reverse functions

All services come with a 90 day guarantee.

When dropping your machine off we will take a non refundable $50 diagnostic fee. The fee will be applied to the cost of the repair. If you decide not to fix your machine after the estimate it may be applied to the purchase of a new machine, and if you decide to do neither it will applied to cover our time to diagnose your machine.